Write a Python program to perform the following tasks

INSTRUCTIONS TO CANDIDATES

ANSWER ALL QUESTIONS

ICT 133 Structured Programming 

Tutor-Marked Assignment 

July 2019 Presentation 

ICT 133 Tutor-Marked Assignment 

TUTOR-MARKED ASSIGNMENT (TMA) 

This assignment is worth 18 % of the final mark for ICT133, Structured Programming. 

The cut-off date for this assignment is Wednesday 04 September 2019, 2355hrs. 

Assignment Requirements: 

Do NOT define classes for this TMA. 

Unless specified in the question, you CANNOT use packages not covered in this module, e.g., numpy, pandas etc.. 

Provide sufficient comments to your code, and ensure that your program adheres to good programming practices such as not using global variables. 

Failing to do so can incur a penalty of as much as 50% of the mark allotted. 

Submission Details: 

Use the template word document provided - SUSS_PI_No-FullName_TMA.docx. Rename the file with your SUSS PI and full name join with “_TMA” e.g. “SUSS_PI- TomTanKinMeng_TMA.docx” (without the quotes). 

Include the following particulars on the first page of the word document, on separate lines: Course Code, SUSS PI No., Your Name, Tutorial Group and Submission Date. 

Copy and paste the source code of each program you write in text format. Submit screenshots for only output of your program, where applicable. 

If you submit the source code as a screenshot, your code will not be marked. That is, screenshot code will be awarded zero mark. 

Submit your solution in the form of a single MS Word document. Do NOT submit as a pdf document. You will be penalised if you fail to submit a word document. 

You should make only one submission for TMA. 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 2 of 17 

ICT 133 Tutor-Marked Assignment 

Question 1 

Write complete full Python programs for each part, to perform the following tasks 

1. a) Write a Python program to perform the following tasks. 

• Prompt a user to enter the following pieces of information: 

o the initial value of an investment, i o the expected final value of an investment, f and o the number of years to accumulate the initial value to reach the 

final value, n. 

• Compute the annual compound interest rate in percent, r using the formula: 

r = 100(√n fi 

− 1) 

• Prompt the user to enter the number of years, y, he wishes to invest. 
• Compute the final amount based on the computed compound interest rate, using the formula: 

f = i(1 + 100r)y 

• Display the final amount based on the computed compound interest rate. Numbers should be displayed with 2 decimal digits. 

An example run with user input in green is shown here: 

Enter the initial bank balance: 100 Enter the final bank balance: 120 Enter the number of years to reach final balance: 5 How many years to deposit given average interest rate is 3.71%: 10 After 10 years, you will have $144.00 

(3 marks) 

1. b) Make a copy of your Python program in part a) for this part as you need to submit 

the program for part a). Add a check that if the final amount is less than the initial amount, prompt whether the user wishes to swap the values of the initial amount with the final amount. If the user does not wish to swap, proceed as usual. Allow the user to respond in uppercase or lowercase. You may assume that the user enters either an n or a y as the first non-whitespace character. 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 3 of 17 

ICT 133 Tutor-Marked Assignment 

Two sample runs with user input in green are shown here: Run 1: 

Enter the initial bank balance: 200 Enter the final bank balance: 100 Initial value: $200 is more than final value: $100 Do you wish to swap the values? (y/n): n OK. Getting negative returns Enter the number of years to reach final balance: 5 How many years to deposit given average interest rate is -12.94%: 10 After 10 years, you will have $50.00 

Run 2: 

Enter the initial bank balance: 200 Enter the final bank balance: 100 Initial value: $200 is more than final value: $100 Do you wish to swap the values? (y/n): yes The values have been swapped Enter the number of years to reach final balance: 5 How many years to deposit given average interest rate is 14.87%: 10 After 10 years, you will have $400.00 

(3 marks) 

1. c) Make a copy of your Python program in part b) for this part as you need to 

submit the program for part b). Add a check to ensure that the user enters either an n or a y as the first non- whitespace character when prompted whether he wishes to swap. You should repeatedly prompt the user until he enters a valid value. 

An example run with user input in green is shown here: 

Enter the initial bank balance: 200 Enter the final bank balance: 100 Initial value: $200 is more than final value: $100 Do you wish to swap the values? (y/n): Do you wish to swap the values? (y/n): an Do you wish to swap the values? (y/n): a Do you wish to swap the values? (y/n): na OK. Getting negative returns Enter the number of years to reach final balance: 5 How many years to deposit given average interest rate is -12.94%: 10 After 10 years, you will have $50.00 

(3 marks) 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 4 of 17 

ICT 133 Tutor-Marked Assignment 

1. d) Make a copy of your Python program in part c) for this part as you need to submit 

the program for part c). Modify the code segment for part a) so that the program display the yearly value of the investment amount from the initial amount to the final amount, instead of displaying only the final amount. 

An example run with user input in green is shown here: 

Enter the initial bank balance: 200 Enter the final bank balance: 100 Initial value: $200 is more than final value: $100 Do you wish to swap the values? (y/n): nah OK. Getting negative returns Enter the number of years to reach final balance: 5 How many years to deposit given average interest rate is -12.94%: 10 Year Amount($) 1 174.11 2 151.57 3 131.95 4 114.87 5 100.00 6 87.06 7 75.79 8 65.98 9 57.43 10 50.00 

(3 marks) 

1. e) Make a copy of your Python program in part d) for this part as you need to submit 

the program for part d). Allow the user to repeatedly enter new initial and final values until he enters 0 for the initial amount. Perform the steps as usual for each pair of initial and final values. You must modularise your program for this part by defining at least 2 functions. An example run with user input in green is shown here: 

Enter the initial bank balance: 100 Enter the final bank balance: 200 Enter the number of years to reach final balance: 2 How many years to deposit given average interest rate is 41.42%: 5 Year Amount($) 1 141.42 2 200.00 3 282.84 4 400.00 5 565.69 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 5 of 17 

ICT 133 Tutor-Marked Assignment 

Enter the initial bank balance: 500 Enter the final bank balance: 300 Initial value: $500 is more than final value: $300 Do you wish to swap the values? (y/n): n OK. Getting negative returns Enter the number of years to reach final balance: 2 How many years to deposit given average interest rate is -22.54%: 5 Year Amount($) 1 387.30 2 300.00 3 232.38 4 180.00 5 139.43 Enter the initial bank balance: 0 Program end 

(8 marks) 

Paste the whole Python programs for each part: a) to e) as text into the word document. You should submit 5 complete programs. Screenshot output obtained from the execution of each program, and paste them into the word document. 

Question 2 

To enable collaborative learning through participation and engagement, you are encouraged to make postings in a discussion forum. You must NOT post Python code in the discussion forum. 

The problem: 

An expression is something that evaluates to a value, e.g., 3 + 4 evaluates to 7. As you learn to write Python programs, you will realise that writing syntactically correct expressions is a must for them to be evaluated by the Python interpreter. For example, 3 + / 4 is not a valid expression, and so, the Python interpreter cannot evaluate it. 

In this question, you are to solve the problem of determining whether an expression is valid, and to evaluate it if it is so. Otherwise, you are to provide a helpful error message. In other words, you are to write a program to handle a small portion of what a Python interpreter needs to do when it gets an expression to evaluate. 

Consider only simplified expressions as described here: 

• An expression may contain only these binary operators: +, -, /. // and *. 
• Parentheses, that is, ( and ), can be used to change the order of the evaluation of the operations. 
• Operands are negative or positive numeric values (int or float). 
• Operands cannot be variables. 

The Python interpreter needs to tokenise the expression, however, you can simplify the tokenising process by assuming that the tokens (number, parentheses and operators) in the expression will be separated by whitespace. Thus, you will be able to get a next token by moving past whitespaces. 

Examples of invalid expressions with explanation are given below: 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 6 of 17 

ICT 133 Tutor-Marked Assignment 

Invalid expressions Explanation 1 + 2 + a + 4 Operand must be a number, a is not a number ( 1 + 3 ) ) Unbalanced parentheses ( 1 + 3 ) * ( ( 2 ) Unbalanced parentheses 33.3 + + 1 Operators require a left and right numeric operands ( 33 ) ( 1 ) Operands must be separated by an operator ) ( No preceding left parenthesis for the right parenthesis ( ) No operand within the bracket 

Examples of valid expressions with explanation and the evaluated result are given below: valid expressions Reasons Result of evaluation 

1.2 + -3 Operand operator operand -1.8 ( ( 1 + 3 ) ) Balanced parentheses, operand 

operator operand 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 7 of 17 

4 

( 1 + 3 ) * ( ( 2 ) ) Balanced parentheses, operand 

operator operand 

8 

33.3 + -2 + 1 Operand operator operand 32.3 ( 33 ) / ( -1 ) Operand operator operand -33.0 ( 33 ) // ( 1 ) Operand operator operand 33 

1. a) Before embarking on the program development, journal your learning journey by making postings for ALL items listed below (You must NOT POST ANY PYTHON CODE, and your posting should be clear, understandable and with SUFFICIENT elaboration): 

• at least TWO difficulties or questions you have about the problem 
• at least TWO difficulties or questions you have when attempting to solve the problem, 
• at least TWO suggestions, clarifications, observation or feedback to other students’ postings, accompanied with reasons 
• at least TWO conclusions of your research on the problem and how to solve it (Note that no Python code should be posted) 
• at least TWO important lessons you have through this exercise. Copy and paste at least THREE (3) postings that collectively cover ALL FIVE (5) bulleted items. The postings you submit should have at least THREE (3) different posting dates on THREE (3) different weeks. Each posting should not cover more than 2 of the 5 bulleted items. If postings are made on the same week (Sun-Sat), only one of them will be awarded mark. (12 marks) 

1. b) Demonstrate your understanding of modular program design, and develop the program that repeatedly read an expression and output only one of the following messages: 

- Unexpected right parenthesis between expr_left and )expr_right - There is 1 unclosed left parenthesis in expr 

ICT 133 Tutor-Marked Assignment 

- There are n unclosed left parentheses in expr - Invalid expression, expecting operator between expr_left and expr_right - Invalid expression, expecting operand between expr_left and expr_right - Invalid expression, expecting operand between expr_left and expr_right 

but currentToken is a variable - result from evaluating the expression. 

You may use the function eval to evaluate an expression. 

Note that expr_left refers to the portion of the expression without error and expr_right refers to start of where the error occurs in the expression. expr refers to the input expression, and currentToken refers to the current token being processed. 

Your program should process the tokens in the input expressions without generating exceptions, and your program cannot use the try-except construct. 

An example run with user input in green is shown here: 

Enter an expression: 1 + 2 + a + 4 Invalid expression, expecting operand between 1 + 2 + and + 4 but a is a variable Enter an expression: ( 1 + 3 ) ) Unexpected right parenthesis between ( 1 + 3 ) and ) Enter an expression: ( 1 + 3 ) * ( ( 2 ) There is 1 unclosed left parenthesis in ( 1 + 3 ) * ( ( 2 ) Enter an expression: 33.3 + + 1 Invalid expression, expecting operand between 33.3 + and + 1 Enter an expression: ( 33 ) ( 1 ) Invalid expression, expecting operator between ( 33 ) and ( 1 ) Enter an expression: ) ( Unexpected right parenthesis between and ) ( Enter an expression: ( ) Invalid expression, expecting operand between ( and ) Enter an expression: 1.2 + -3 The answer is -1.8 Enter an expression: ( ( 1 + 3 ) ) The answer is 4 Enter an expression: ( 1 + 3 ) * ( ( 2 ) ) The answer is 8 Enter an expression: 33.3 + -2 + 1 The answer is 32.3 Enter an expression: ( 33) / ( -1 )` Invalid expression, expecting operand between ( and 33) / ( -1 ) Enter an expression: ( 33 ) / ( -1 ) The answer is -33.0 Enter an expression: ( 33 ) // ( 1 ) The answer is 33 Enter an expression: Application ended 

(18 marks) 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 8 of 17 

ICT 133 Tutor-Marked Assignment 

Screenshot your postings for part Q2a), and paste them into the word document. Ensure that your screenshots are readable. Copy also the links to each of your postings. 

Paste the Python code for part Q2b) as text into the word document. Screenshot output obtained from the execution of the program, and paste them into the word document. 

Question 3 

You are required to develop an application to manage a patient queue in a clinic. Details recorded for each patient in a wait queue are as follow: 

• patient id 
• patient name 
• patient queue number The queue number is a running number starting from 1. The first registered patient has queue number 1, the second registered patient has queue number 2, the third registered patient has queue number 3, and so on. 
• number of times the patient’s queue number is called but he missed the calls When a patient is called, the probability that he is ready to see the doctor is 25%. That is, assume that 75% of the time, the patient misses seeing the doctor when his queue number is called. When the patient misses seeing the doctor, the number of call he misses is increased by 1. 

The application allows the clinic staff to select tasks from the following menu: 

Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient’s Queue Position 5. Record Patients Seen 0. Exit 

Apply modular programming and decide on the functions to implement the application. You must not use the collection type, dict for this question. Add any other steps not described for the options and for the main function of the application to fulfil their requirements: 

• Register a Patient 

o Prompt the user for the patient id. o If the patient id is already in the wait queue, display that patient is already in the wait queue, together with his queue number and his position in the queue. o Otherwise, prompt for the patient’s name, and add him into the wait queue with the details: patient id, name, the queue number given at registration, and the number of calls missed set to 0 initially. o Add the newly registered patient to the wait queue. o Display the patient id and his registered queue number. 

(7 marks) 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 9 of 17 

ICT 133 Tutor-Marked Assignment 

• Call Next Patient 

o Display that there is no patient in wait queue if the wait queue is empty. o Otherwise, display the queue number of the first patient in the wait 

queue. o In the event that the patient is ready to see the doctor, he is removed from the wait queue, and put into another ‘seen doctor’ queue, to indicate that the patient has gotten to see doctor. Display a message to indicate that the patient is being served. o In the event that the patient misses seeing the doctor when his queue 

number is called, add 1 to the number of call he misses. o If the number of calls missed becomes 3, the patient is put to the end of the wait queue. Reset his number of calls missed to zero. Display a message to indicate that the patient has been pushed to the end of the wait queue. The next patient in the wait queue is called, and the same process is repeated until one patient responded to the call or until the end of the wait queue is reached. o If end of the wait queue is reached and none of the patients responded, display the message that none of the patients in the queue is responding. 

(7 marks) 

• List Patients in Queue 

o Display that there is no patient in wait queue if the wait queue is empty o Display a header for the patient detail: patient id, name, queue number, 

number of missed calls. o Display the details of patients in wait queue. Ensure that the details show 

up in the correct header. 

(2 marks) 

• Search Patient’s Queue Position 

o Display that there is no patient in wait queue if the wait queue is empty o Otherwise, prompt for patient id o Display patient is not in the wait queue if the patient id cannot be located 

in queue o Display the patient’s id, name, queue number and position in wait queue 

if the patient id can be located in queue. 

(3 marks) 

• Record Patients Seen 

o Append the details of patients in the ‘seen doctor’ queue: patient id, name 

and queue number to a file, seenQ3.txt. o Empty the ‘seen doctor’ queue. Note that the queue may (re)grow when 

option Call Next Patient is called. o Display the number of patient details written into the file. 

(3 marks) 

• Exit If there are patients in the ‘seen doctor’ queue but their details have not been written to seenQ3.txt yet, then append them to the file before ending the application. Note that the details include patient id, name and queue number. (1 mark) 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 10 of 17 

ICT 133 Tutor-Marked Assignment 

Write a main function to repeatedly display the menu to allow a clinic staff (the user) to select an option to call the appropriate functions to perform task according to the specifications. The application ends when the user enters 0 to exit. 

(2 marks) 

An example run with user input in green is shown here: 

Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 2 No patient in queue Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 3 No patient in Queue Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 4 No patient in Queue Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 5 0 patient added Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 1 Enter patient's id: T123 Enter patient's name: Tom T123 is registered with queue number 1 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 1 Enter patient's id: T098 Enter patient's name: Jane T098 is registered with queue number 2 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 11 of 17 

ICT 133 Tutor-Marked Assignment 

Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 1 Enter patient's id: S222 Enter patient's name: Alice S222 is registered with queue number 3 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 3 PatientId Name Queue Number Calls missed T123 Tom 1 0 T098 Jane 2 0 S222 Alice 3 0 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 1 Enter patient's id: T098 Patient id T098 is in position 2 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 2 Calling queue number 1 Calling queue number 2 Calling queue number 3 No patient is responding Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 3 PatientId Name Queue Number Calls missed T123 Tom 1 1 T098 Jane 2 1 S222 Alice 3 1 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 2 Calling queue number 1 Serving queue number 1 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 12 of 17 

ICT 133 Tutor-Marked Assignment 

Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 4 Enter patient's id: T123 Patient id T123 is not in queue Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 4 Enter patient's id: T098 Patient id T098 is in position 1 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 2 Calling queue number 2 Calling queue number 3 No patient is responding Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 3 PatientId Name Queue Number Calls missed T098 Jane 2 2 S222 Alice 3 2 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 2 Calling queue number 2 Serving queue number 2 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 5 2 patients added Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 13 of 17 

ICT 133 Tutor-Marked Assignment 

1. Exit Enter option: 2 Calling queue number 3 S222 is moved to end of patient queue No patient is responding Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 2 Calling queue number 3 No patient is responding Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 1 Enter patient's id: T999 Enter patient's name: Peter T999 is registered with queue number 4 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 3 PatientId Name Queue Number Calls missed S222 Alice 3 1 T999 Peter 4 0 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 2 Calling queue number 3 S222 is moved to end of patient queue Calling queue number 4 Serving queue number 4 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 5 1 patient added Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 2 Calling queue number 3 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 14 of 17 

ICT 133 Tutor-Marked Assignment 

Serving queue number 3 Menu 1. Register a Patient 2. Call Next Patient 3. List Patients in Queue 4. Search Patient's Queue Position 5. Record Patients Seen 0. Exit Enter option: 0 1 patient added Application is closing 

Content of file, seenQ3.txt which records details of patients who have seen doctor: 

T123 Tom 1 T098 Jane 2 T999 Peter 4 S222 Alice 3 

Paste the Python program as text into the word document. Screenshot output obtained from the execution of the program, and paste them into the word document. 

Question 4 

You are required to implement a simple variant of Blackjack using dice. The game is played among several players, and the winner is the player who has the highest total dice value. 

Your program must keep track of players’ name, points and dice values. You must use the collection type dict to store the players’ details as well as the collection of players. You may use list for any other collection. 

Refer to the example runs. Your program must adhere to these guidelines: 

• There must be a minimum of 3 players and a maximum of 5. Start by getting the names of 3 to 5 players. Players’ names must be unique. 
• Each player starts with 2 points 

(5 marks) 

• For each new game, randomly order the players, so that they roll the dice according to this order. 

(2 marks) 

• Each game starts with each player rolling 2 dice. Display the total for each player. 

(3 marks) 

• Each player then takes turn to decide whether to roll a dice or to miss. If he rolls a dice, he can decide to keep rolling as long as the total is not 13 or more. Display the total for the player each time he rolls a dice. 

(5 marks) 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 15 of 17 

ICT 133 Tutor-Marked Assignment 

• At the end of the game, the points for the players are adjusted as follows: 

o Add 2 points to players with the highest total dice value that does not 

exceed 13. There can be more than one winner. o Deduct 2 points from players who bust, that is, their total dice value 

exceeds 13. o Do not adjust the points for all other players. o Display the game summary. 

(6 marks) 

• The players can continue to play more games with their existing points as long as there is no player with 0 point or with 10 points. 

(4 marks) 

Two example runs are shown below: 

Run 1: 

Enter player name, <Enter> to end: Minimum 3 players please, currently only 0 player! Enter player name, <Enter> to end: A Enter player name, <Enter> to end: B Enter player name, <Enter> to end: C Enter player name, <Enter> to end: D Enter player name, <Enter> to end: E 5 players playing Playing in this order: (D, E, A, B, C) Start game. Roll 2 dice per player D, dice: (2, 6), total 8 E, dice: (4, 1), total 5 A, dice: (6, 6), total 12 B, dice: (2, 6), total 8 C, dice: (5, 1), total 6 D, roll or miss? (r/m)? r D, dice: (2, 6, 4), total 12 D, roll or miss? (r/m)? m E, roll or miss? (r/m)? r E, dice: (4, 1, 4), total 9 E, roll or miss? (r/m)? r E, dice: (4, 1, 4, 5), total 14. Bust! A, roll or miss? (r/m)? m B, roll or miss? (r/m)? m C, roll or miss? (r/m)? m Game summary: D, dice: (2, 6, 4), total 12. Winner! Points: 2+2 = 4 E, dice: (4, 1, 4, 5), total 14. Bust! Points: 2-2 = 0 A, dice: (6, 6), total 12. Winner! Points: 2+2 = 4 B, dice: (2, 6), total 8. Points: 2 C, dice: (5, 1), total 6. Points: 2 Player bust. End game 

Run 2: 

Enter player name, <Enter> to end: A Enter player name, <Enter> to end: B Enter player name, <Enter> to end: C Enter player name, <Enter> to end: 3 players playing Playing in this order: (B, C, A) 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 16 of 17 

ICT 133 Tutor-Marked Assignment 

Start game. Roll 2 dice per player B, dice: (1, 6), total 7 C, dice: (2, 2), total 4 A, dice: (1, 2), total 3 B, roll or miss? (r/m)? r B, dice: (1, 6, 4), total 11 B, roll or miss? (r/m)? m C, roll or miss? (r/m)? r C, dice: (2, 2, 6), total 10 C, roll or miss? (r/m)? r C, dice: (2, 2, 6, 3), total 13 A, roll or miss? (r/m)? r A, dice: (1, 2, 4), total 7 A, roll or miss? (r/m)? r A, dice: (1, 2, 4, 4), total 11 A, roll or miss? (r/m)? m Game summary: B, dice: (1, 6, 4), total 11. Points: 2 C, dice: (2, 2, 6, 3), total 13. Winner! Points: 2+2 = 4 A, dice: (1, 2, 4, 4), total 11. Points: 2 Continue next game (y/n)? y Playing in this order: (C, A, B) Start game. Roll 2 dice per player C, dice: (1, 5), total 6 A, dice: (3, 5), total 8 B, dice: (2, 3), total 5 C, roll or miss? (r/m)? r C, dice: (1, 5, 1), total 7 C, roll or miss? (r/m)? r C, dice: (1, 5, 1, 1), total 8 C, roll or miss? (r/m)? m A, roll or miss? (r/m)? m B, roll or miss? (r/m)? r B, dice: (2, 3, 1), total 6 B, roll or miss? (r/m)? r B, dice: (2, 3, 1, 6), total 12 B, roll or miss? (r/m)? m Game summary: C, dice: (1, 5, 1, 1), total 8. Points: 4 A, dice: (3, 5), total 8. Points: 2 B, dice: (2, 3, 1, 6), total 12. Winner! Points: 2+2 = 4 Continue next game (y/n)? n End game 

Paste the Python program as text into the word document. Screenshot output obtained from the execution of the program for 2 different game sessions and paste them into the word document. 

---- END OF ASSIGNMENT ---- 

SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 17 of 17 

Related Questions

. The fundamental operations of create, read, update, and delete (CRUD) in either Python or Java

CS 340 Milestone One Guidelines and Rubric  Overview: For this assignment, you will implement the fundamental operations of create, read, update,

. Develop a program to emulate a purchase transaction at a retail store. This  program will have two classes, a LineItem class and a Transaction class

Retail Transaction Programming Project  Project Requirements:  Develop a program to emulate a purchase transaction at a retail store. This

. The following program contains five errors. Identify the errors and fix them

7COM1028   Secure Systems Programming   Referral Coursework: Secure

. Accepts the following from a user: Item Name Item Quantity Item Price Allows the user to create a file to store the sales receipt contents

Create a GUI program that:Accepts the following from a user:Item NameItem QuantityItem PriceAllows the user to create a file to store the sales receip

. The final project will encompass developing a web service using a software stack and implementing an industry-standard interface. Regardless of whether you choose to pursue application development goals as a pure developer or as a software engineer

CS 340 Final Project Guidelines and Rubric  Overview The final project will encompass developing a web service using a software stack and impleme